The TDY-2 mobile operating table has a full 304 stainless steel bed and column, easy to clean and anti-pollution.
The table surface is divided into 5 parts: head section, back section, buttocks section, and two detachable leg sections.
The TDY-2 mobile operating table can be translated over a distance of 340mm, providing a good perspective area for the C-arm during surgery, and can be used with X-ray film boxes.
Double joint head board, adjustable leg board through gas spring. Use German brand silent casters. There is also one-button reset, one-button buckling and anti-buckling functions are optional.
This multifunctional electrical operating table is suitable for various surgery, such as abdominal surgery, obstetrics, gynecology, ENT, urology, anorectal and orthopedics, etc
1.Double joint head plate
The double-joint head plate of this electrical operating table can freely adjust the height of the headboard, allowing the patient to have a comfortable head angle when performing operations in different positions.
2.Leg Plate can be Electric Control or Gas Spring Control
The leg plate can be controlled by a gas spring or can be upgraded to electric control.
3. Optional Double Control System
The hand controller and optional panel controls offers double protection for surgery.
4. Big Casters
Imported German TENTE casters, wear-resistant and silent.
5. Built-in Rechargeable Battery
TDY-2 electric operating table is equipped with a high-performance rechargeable battery, which can meet the needs of 50 operations. At the same time, it has an AC power supply to provide electrical energy to ensure maximum safety.
6. More Optional Choice
Optional one-button reset, positive flexion and reverse flexion function.
|Model Item||TDY -2 Mobile Electric Operating Table|
|Length and Width||2100mm*550mm|
|Elevation( Up and Down)||1000mm/ 700mm|
|Head Plate (Up and Down)||45° 90°|
|Back Plate (Up and Down)||90°/ 17°|
|Leg Plate (Up /Down/ Outward)||15°/ 90°/ 90°|
|Trendelenburg/Reverse Trendelenburg||25°/ 25°|
|Lateral Tilt (Left and Right)||15°/ 15°|
|Kidney Bridge Elevation||≥110mm|
|Flex/ Reflex||Combination Operation|
|Frequency||50Hz / 60Hz|
|Power Compacity||1.0 KW|
|Main Material||304 Stainless Steel|
|Maximum Load Capacity||200 KG|
|1||Anesthesia Screen||1 piece|
|2||Body Support||1 pair|
|3||Arm Support||1 pair|
|4||Shoulder Support||1 pair|
|5||Leg Support||1 pair|
|6||Foot Support||1 pair|
|6||Kidney Bridge Handle||1 piece|
|8||Fixing Clamp||8 pieces|
|9||Long Fixing Clamp||1 pair|
|10||Hand Remote||1 piece|
|11||Power Line||1 piece|